Stm32g0 with HAL library

Training in microcontrollers for the stm32g0 Cortex-M0+ family with the official STM32CubeG0 library. Learn to use peripherals GPIO, UART, CAN, SPI, I2C, PWM, TIM, RTC, RCC, DMA. More than 120 examples and exercises for you to develop and increase your expertise, plus three hands on projects.

Part VII: Serial Peripheral Interface

The SPI or "Serial Peripheral Interface" is a synchronous serial communication protocol, full duplex, created by Motorola. Devices are connected in Master/Slave mode, in which the master is always responsible

Part VI: Analog to Digital Converter

An Analog-to-Digital Converter (ADC) is an electronic device capable of converting an analog voltage signal into a digital signal with a binary value. Computers or any control system based on a microprocessor cannot

Part V: System Clocks

Most of the digital systems needs its own clock signal in order to work , amount other things it give us the speed in which most of the operation are going to be carried

Part IV: Universal Asynchronous Receiver Transmitter

A serial port, also known as a serial interface, is a digital data communication interface where information is transmitted bit by bit, sending one bit at a time. Serial ports are perhaps, alongside

Part III: Timers Module

Measuring time is one of the basic needs within any program, and programs for microcontrollers are no exception. We can generate time intervals by counting instructions of the CPU itself, but this method,